Fencing · Project planning

Horizontal Fence Calculator

Count horizontal board rows and one board per row per physical bay. Check stock length against the equalized bay length before ordering.

By Alish Gautam, Software Developer · Updated · Calculation methodology

Start with the editable example below. Dimensions retain their physical size when units change. Region sets currency labels without converting currencies; confirm entered quotes after changing region.

Fence layout

Run length includes gate openings. Gate offset is measured from the run start. Corner and straight connections share the preceding end post.

Run 1
Basic settings
Editable wood-fence planning example. Use project or manufacturer limits.
Editable arithmetic example. Replace with your project or product specification.
Product settings
Product and system dimensions
Editable arithmetic example. Replace with your project or product specification.
Editable arithmetic example. Replace with your project or product specification.
Editable arithmetic example. Replace with your project or product specification.
Editable arithmetic example. Replace with your project or product specification.
Editable arithmetic example. Replace with your project or product specification.
Optional supplier product name, chart revision or quote reference, saved in shared project state.
Advanced settings
Advanced planning settings
Connect the last run back to the first. All runs must form one connected perimeter.
Enter the combined post-face / bracket reduction per bay. Zero treats the equal bay spacing as the clear board field.
Planning allowance, not a code or industry requirement. Set zero to order the exact rounded takeoff.
Cost settings · USD
Optional quote prices
Optional supplier quote in the selected currency. Blank omits cost.

Project takeoff

Whole packages round up. Allowance is separate from purchased surplus. Prices omit labor, delivery, tax and other items unless explicitly entered.

Total measured fence run
100 ft
Gate openings
0 ft
Net infill length
100 ft
Maximum bay spacing
8 ft
Infill bays
13
Physical posts
14
Horizontal rows
13
Net requirement
169 pieces
Allowance
16.9 pieces
Planned requirement
185.9 pieces
Unrounded package requirement
185.9
Boards / pickets to buy
186
Purchased coverage
186 pieces
Surplus beyond planned requirement
0.1 pieces

Supplier-ready material list

Specified fence / board height
6 ft
line posts
12
end posts
2
corner posts
0
gate posts
0
Boards / pickets to buy
186
Rails to buy
43
Rail installed linear length
300 ft
Fasteners before reserve
1,014
Geometry / layout breakdown
Dimensions use the selected measurement system.
RunInfill (ft)BaysEqual spacing (ft)
Run 1100137.692
Infill span sketch. Shared supports appear in both spans; the physical post total above counts each once. Gate openings are omitted from infill.
Infill span elevationsSpan 1: Run 1 · 13 bays

A stock board shorter than the bay triggers a warning. No unsupported floating joint or automatic cut reuse is assumed.

How it works

Rows = ceil((height + vertical gap) / (board width + vertical gap)). Boards = rows × bays.

Assumptions and limitations

A stock board shorter than the bay triggers a warning. No unsupported floating joint or automatic cut reuse is assumed.

Whole packages round upward after the chosen allowance. Physical geometry and purchase reserve are separate. Manufacturer and project specifications override editable examples; the selected region does not establish a local code requirement.

Sources and boundaries

This method uses geometric arithmetic and user-entered dimensions. No installation requirement or material property is inferred from a standard.