Flooring & Tile · Project planning

Laminate Flooring Calculator

Plan laminate carton coverage and balanced rows using your selected product’s expansion and stagger dimensions. Orientation can change edge widths and end cuts.

By Alish Gautam, Software Developer · Updated 4 October 2026 · Calculation methodology

Start with the editable example below. Dimensions retain their physical size when units change. Region sets currency labels without converting currencies; confirm entered quotes after changing region.

Measured rooms and floor surfaces

Use non-overlapping rectangles. Enter openings as area on the surface they interrupt.

Room / surface 1

Room / floor label

Room length (ft)

Room width (ft)

Excluded floor area (ft²)

Basic settings

Installation directionDirection sets which room axis is along a plank.

Product settings

Product and system dimensions

Coverage per pack (ft²)Editable arithmetic example. Replace with your project or product specification.

Plank length (in)Editable arithmetic example. Replace with your project or product specification.

Actual plank face width (in)Editable arithmetic example. Replace with your project or product specification.

Manufacturer expansion gap (in)Editable arithmetic example. Replace with your project or product specification.

Minimum first / last row width (in)Editable arithmetic example. Replace with your project or product specification.

Minimum end piece (in)Editable arithmetic example. Replace with your project or product specification.

Minimum adjacent-row stagger (in)Editable arithmetic example. Replace with your project or product specification.

Product / specification referenceOptional supplier product name, chart revision or quote reference, saved in shared project state.

Advanced settings

Advanced planning settings

Stagger patternFractional or repeatable random schedules are planning choices; follow the product instructions.

Purchase allowance (%)Planning allowance, not a code or industry requirement. Set zero to order the exact rounded takeoff.

Cost settings · USD

Optional quote prices

Price per purchased pack / unitOptional supplier quote in the selected currency. Blank omits cost.

Project takeoff

Whole packages round up. Allowance is separate from purchased surplus. Prices omit labor, delivery, tax and other items unless explicitly entered.

Gross measured area: 120 ft²
Opening / exclusion deductions: 0 ft²
Net requirement: 120 ft²
Allowance: 12 ft²
Planned requirement: 132 ft²
Unrounded package requirement: 3.3
Cartons to buy: 4
Purchased coverage: 160 ft²
Surplus beyond planned requirement: 28 ft²
Room / surface 1: rows: 20
Room / surface 1: first / last row: 5.75 in
Room / surface 1: installed pieces: 73

Supplier-ready material list

Cartons to buy: 4

Geometry / layout breakdown

Dimensions use the selected measurement system.
Room	Row	Width (in)	Starter (in)	Full pieces	End (in)
Room / surface 1	1	5.75	48	1	47.5
Room / surface 1	2	6	32	2	15.5
Room / surface 1	3	6	16	2	31.5
Room / surface 1	4	6	48	1	47.5
Room / surface 1	5	6	32	2	15.5
Room / surface 1	6	6	16	2	31.5
Room / surface 1	7	6	48	1	47.5
Room / surface 1	8	6	32	2	15.5
Room / surface 1	9	6	16	2	31.5
Room / surface 1	10	6	48	1	47.5
Room / surface 1	11	6	32	2	15.5
Room / surface 1	12	6	16	2	31.5
Room / surface 1	13	6	48	1	47.5
Room / surface 1	14	6	32	2	15.5
Room / surface 1	15	6	16	2	31.5
Room / surface 1	16	6	48	1	47.5
Room / surface 1	17	6	32	2	15.5
Room / surface 1	18	6	16	2	31.5
Room / surface 1	19	6	48	1	47.5
Room / surface 1	20	5.75	32	2	15.5

There is no universal laminate expansion gap. Separate underlayment, wet-area suitability and maximum continuous floor dimensions are product-specific.

How it works

Net floor area feeds carton rounding; usable room dimensions and fixed plank geometry feed the row simulation.

Assumptions and limitations

There is no universal laminate expansion gap. Separate underlayment, wet-area suitability and maximum continuous floor dimensions are product-specific.

Whole packages round upward after the chosen allowance. Physical geometry and purchase reserve are separate. Manufacturer and project specifications override editable examples; the selected region does not establish a local code requirement.

Sources and boundaries

North American Laminate Flooring Association: Installation Guidance

Open the source · Association resources · Reference checked 2026-10-04

Scope: Laminate installation resources

Used for: Laminate product and installation guidance only.

Does not establish: Resilient vinyl installation requirements; Universal expansion gap; Universal underlayment requirement.

Use the current product document to verify numerical inputs. This reference applies to laminate portions of mixed-system pages. Product-specific instructions override editable arithmetic examples.