Chain-Link Fence Cost: Fabric, Terminals and Hardware

Identify fabric height, mesh, wire gauge and coating, plus line and terminal post specifications. List top rail, bottom tension wire, ties, hog rings, caps and gate assemblies. Privacy slats and exposed sites need separate loading review; an ordinary open-fabric quantity schedule does not cover their design.

The publicly available CLFMI guide provides an installation baseline, while ASTM F567 identifies the installation-practice scope. Neither reference supplies current retail prices. Ask suppliers to price the selected specification, not a generic chain-link package.

Two 20 ft runs connected at a corner, at a 10 ft maximum spacing, have four bays and five physical posts: two line posts, two ends and one corner. The corner has two infill directions, so the assembly has four fabric terminations rather than three. That gives four tension bars before unusual system details.

Fabric rolls can be combined across spans if cutting from rolls is practical. Rail sticks are rounded at each span because a corner prevents treating the route as one straight stock length. Ties and band counts must follow the installation specification.

Compare material quantities, concrete, gates, removal, excavation, stretching, delivery, labor and tax. Record each quote’s date, locality and currency; price-per-foot comparisons should state whether gates remain in the denominator. The dated US reference above includes ordinary installation; it does not price the particular hardware schedule. A quote omitting terminal hardware is incomplete even when its fabric rate appears competitive.